LiquaGen Set of 10 - Quick Connect 1/4" Male Elbow Aquarium RO Water Fitting
For soft or thin walled plastic tubing we recommend the use of a tube insert. Insert tube fitting grips before it seals. Ensure tube is pushed in to the tube stop. Push up to tube stop. Push the tube into the fitting, to the tube stop.
The collet (gripper) has stainless steel teeth which will hold the tube firmly in position while the "O" ring provides a permanent leak proof seal. Pull to check secure. Pull on the tube to check if it is secure. It is good practice to test the system prior to leaving site and/or before use. Disconnecting Push in Collet and remove tube. To disconnect, ensure the system is depressurized before removing fitting. Push in collet squarely against face of fitting. With the Collet held in this position, the tube can be removed. The fitting can then be re-used. This is a sale for TWO(2) Quick Connect 1/4" x 1/4".
1/4 inch x 1/4 inch NPTF Male Elbow - White Information Color: White
Thread NPTF: 1/4"
Replacement RO Parts
LiquaGen - Inlet Straight Quick Connect Check Valve (1/4" x 1/4") for Reverse Osmosis Applications